DVI-I Input board

Part No: 9112 0003


  • DVI-I (Analog+Digital) Input board
  • Digitizes VGA, YUV analog Input formats and converts to HDMI or DVI
  • 10-bit HD and SD; interlaced and progressive A/D conversion
  • Accepts DVI and HDMI 1.3 digital signals with embedded Audio
  • HDCP compliant
  • Autodetects Input signal
  • Deep color support
  • Picture adjustments per Input port, contrast, black level, color etc.
  • Pixel Accurate Reclocking
  • Advanced Digital and Analog EDID Management
  • Adaptive DVI and HDMI cable equalization for up to 20 meters


MX-DVII-HDCP-IB the all-round Input board was designed to handle analog VGA or YUV and digital DVI or HDMI 1.3 with HDCP video signals. Each Input port incorporates an individual EDID Manager, a video A/D converter and a Digital/Analog video switch. No frame delay occurs if an analog signal is digitized. Each port contains an autosync function, however the picture parameters (Hpos, Vpos, Phase, etc.) can be fine-tuned anually. The built in Frame Detector and graphical signal analyzer helps precise adjustments and the Pixel Accurate Reclocking technology provides exceptional signal regeneration capability.

HDCP compliancy: yes
Max Resolution: 1920x1200 or 2048x1080
Power consumption (3.3 V): 3.6 A (typical), 5.6 A (max.)
Power consumption (5 V): 2 A (typical), 3.2 A (max.)
Calculated AC Power (W): 31.3 (typical), 49.3 (max.)
Heat dissipation (BTU): 109 (typical), 151 (max.)
Weight: 450 g
Input connectors: DVI-I

 product brief

user manual

 cad drawing  CE DoC

Port diagram

Supplied accessory
cab dvia vga 300px

UMX VGA cable adapter
(Part No: 1375 0084)
This DVI-I male to VGA female adapter is designed to break out the analog signals from the DVI-I connector and adapt them to a VGA connector.

Join Our Newsletter
High fidelity signal management