DP-OPT-TX150 and DP-OPT-RX150

KVM DisplayPort fiber optical extenders

Part No: 9151 0018 (TX150), 9151 0019 (RX150)

Highlight features

  • DisplayPort 1.1a + Keyboard + Mouse fiber extender
  • Plug and Play – no drivers required
  • Up to UHD and 4096x2400@30Hz pixel resolution
  • HDCP 1.1 compliant extension over one multimode fiber
  • Compatible with Apple LED Cinema Display
  • Support of the latest Mac laptop and desktop computers with Thunderbolt port
  • USB HID* extension of maximum two devices over the same multimode fiber

 

Lightware DP-OPT-TX150 and DP-OPT-RX150 devices extend Dual-mode DisplayPort 1.1a high resolution video and embedded audio with optional HDCP encryption plus USB HID* over one multimode fiber up to 1100 m.

DisplayPort one of the newest video interface standards. Using DisplayPort, high resolution video and excellent quality audio can be transmitted. The interface's 10.8 Gbps bandwidth is capable of transmitting 2560x1600@60Hz pixel resolution video with full support of content protection (HDCP). UHD and 4Kx2K resolution can be achieved up to 30Hz frame rate.

Intelligent HID Emulation is provided for two devices with full transparency. The special HID devices - including
keyboard and mouse - are emulated by the extender and transparently transferred to the computer with the result
that no drivers are required for the proper functionality, it’s as easy as Plug & Play.
DP-OPT-TX150 has 2 extra local USB ports with a built-in HUB and can be connected to the PC/Mac with a single
USB cable.

Dual-mode DisplayPort: when connecting a DVI or HDMI display through an adaptor cable, Dual-mode DisplayPort graphic cards reconfigure their outputs to DVI or HDMI accordingly. Lightware DisplayPort extenders support Dual-mode port extension and adaptor cables.

Thunderbolt: Lightware’s DisplayPort extenders can be used with Thunderbolt sources and devices. The extender pair and the DisplayPort monitor have to be placed at the end of the Thunderbolt chain. Apple Thunderbolt Display is not supported.

Single Fiber Technology makes these units fully DisplayPort 1.1a and HDCP 1.1 compliant without the need of a second fiber cable or copper connections. To simplify cabling, the bi-directional communication - necessary for DisplayPort Link Training, HDCP handshaking and USB transfer - is performed on the same fiber core that transmits the video signal. Both receiver and transmitter are remote configurable from either side through the mini USB connector.

 

Applications

  • Long distance lossless DisplayPort signal and USB HID transmission
  • Apple Cinema Display compatible AV extension
  • Ground loop isolation


Features

  • DisplayPort 1.1a + Keyboard + Mouse fiber extender
  • Dual-mode DP: supports DVI and HDMI adaptors
  • 2560x1600@60Hz maximum pixel resolution
  • UHD and 4Kx2K resolution can be achieved up to 30Hz frame rate (4096x2400@30Hz)
  • HDCP 1.1 compliant extension over one multimode fiber
  • Compatible with Apple LED Cinema Display
  • Support of the latest Mac laptop and desktop computers with Thunderbolt port
  • 4K resolution can be achieved at lower framerate (4096 x 2160 @ 30 Hz)
  • USB HID (Human Interface Device) only
  • External USB HUBs are supported
  • Single Fiber Technology
  • Zero frame latency, no delay
  • No compression
  • SC optical fiber connector
  • Solid Aluminum body
  • Several status LEDs: power, fiber link, source detect, monitor detect, HDCP enable, USB link, K+M emulate
  • USB control
  • Kensington lock support

 

Specifications
Data rate: 1.62 / 2.7 Gbps/lane,maximum: 10.8 Gbps total

Max resolution at 60Hz:

Max resolution at 30Hz:

Other supported resolutions:

2560 x 1600 pixels @ 60 Hz

4Kx2K (4096×2400 pixels)

4096x2160 up to 30 Hz

3840x2160 up to 30Hz

1920x1080@120 Hz

Color depth: 24, 30, 36, 48 bits deep color
HDCP pass through: Yes
Fiber: 50/125 SC Multimode (preferred) 62.5/125 SC Multimode
Laser wavelengths: high speed lanes: 778; 800; 825; 850 nm low speed lanes: 911; 980 nm
Laser class specifications: Class 3R
Transmitter output OMA*: -6.25 dBm (worst case)
Receiver OMA* sensitivity: -14.25 dBm (worst case)
Transmission distance: 1100 m (using OM3e or OM4 type fiber)
Power supply: External power adaptor (100 to 240 V AC, 50-60 Hz)(5 V DC, 2 A)
Power consumption (RX): 3,25 W (typ.) 3,5 W (max) without USB 3,75W (typ.) with USB 8,25 W (max 500mA/USB A conn) with USB
Power consumption (TX): 2,75 W (typ.) 3 W (max) without USB 3,1W (typ.) with USB 8,2 W (max 500mA/USB A conn) with USB
Enclosure: Solid Aluminum
Dimensions: 110 W x 95 D x 18 H mm
Weight: 300 g
Compliance: CE
Warranty: 3 years
 

 

Connectors
DisplayPort: standard DisplayPort gold plated connector
Fiber: SC receptacle
USB HID (RX) 2 x USB-A female connector
USB (TX) 2 x USB-A female connector
USB control: mini USB-B female connector
Power: DC connector (1.35/3.5 mm barrel receptacle)


Maximum extension distances
  OM1 OM2 OM3 OM4
  (62.5/125) (50/125) (50/125) (50/125)
DisplayPort 2560x1600@60Hz 24bpp 150 m 350 m 800 m 1100 m
         

Downloads
product brief rear vieaw
front view cad drawing
accessories compatibility table
quick start guide  user manual
 CE DoC  

 


Standalone diagram

 

Standalone diagram with HDMI projector

 

Standalone diagram with Apple Macbook Pro and LED Cinema Display

  Download pdf

 

Supplied accessorie



Optional accessories

 

PSUx10-200-5V and PSUx20-400-5V


PSUx10-200-5V


PSUx20-400-5V

Rack mountable power supply unit for Lightware products.

   

 
Join Our Newsletter
Download Our
LightBOOK App

LightBOOK Google Play

LightBOOK App Store

 

High fidelity signal management