Discontinued
HDMI 2.0 Output Board
HDMI 2.0 Input Board
HDMI 2.0 Multimode Fiber Input Board
HDMI 2.0 Multimode Fiber Output Board
DisplayPort 1.2 Input Board
4K HDBaseT Input Board with Analog Audio
Featuring eight HDBaseT™ input ports, this board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters.
Twisted pair wallplate and floorbox transmitter
FP‑UMX‑TP‑TX100 is universal video and audio extender designed to handle digital and analog video and audio signals: VGA, YPbPr, RGB, DVI and HDMI 1.3 with analog stereo, and 7.1 HDMI embedded audio.
9x9 Ultra-Thin and Ultra-Light DVI Matrix Switcher
The MX9x9DVI‑Slim is today’s smallest and lightest 9x9 matrix switchers which provide routing in the most rugged environments.
Twisted Pair Output board for DVI over CAT5...CAT7 cables
MX-DVI-TP-OB+ is an 8 channel Output board for transmitting DVI signals over CATx cables. Pixel Accurate Reclocking and the added Advanced EDID Management is incorporated. Using an external 12 Volt DC power supply, remote powering of external TP receivers can also be achieved over the second CATx cable.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
25G Hybrid Matrix Frame with 128x128 Crosspoint
The 25G frames can transmit video signals up to 4K resolution, support all 3D formats, handle forward audio, transmit USB‑KVM, Ethernet, bi‑directional RS‑232/RS‑422, IR and CEC signals. The intuitive graphical user interface offers easy and user‑friendly control accessing all available features. Advanced EDID Management is included in the frame which is also HDCP compliant.
TPS extender for single CATx cable
Lightware’s HDMI‑TPS‑RX95 twisted pair HDBaseT™ extenders provide full HDCP and EDID compliance, receive universal 4K video, audio and Bi-directional RS-232 and IR up to a range of 170 m over a single CATx cable.
HDMI and HDCP Compliant Fiber Optical Output Board
MX‑HDMI‑OPT‑OB provides extremely long, 2500m distance extension over a single Multimode fiber for HDMI, DVI, VGA signals on eight channels with 4K resolution and 3D formats support.
25G 4K DVI-D Output Board with Digital Audio
25G‑8DVID2‑IB provides fully transparent HDMI 1.4 connectivity to the latest high‑end digital sources including 3D between the endpoints.
Ethernet layer
All built‑in 100 Mbit Ethernet ports can be used for controlling devices such as projectors and media players or can provide Ethernet access for all connected devices from a 1 Gigabit uplink. Ethernet, as with every other Layer, can be extended over a single fiber or single CAT cable.
25G Hybrid matrix architecture is the world’s first fully compatible HDMI 1.4 matrix switcher that provides HEC and ARC functions, supports 4K resolutions and 3D formats.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
The Lightware SP2OPT distributes one optical signal to two identical outputs. The splitter is available with different connectors: OpticalCON, -LC, -SC, -ST.
4K HDMI Input Board with Analog Audio and KVM
25G-8HDMI2-A3-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including Audio Return Channel and 3D functions between the endpoints.
RS-232 control layer
Full duplex bi‑directional, more robust and more reliable than IR, RS‑ 232 and RS‑422 have become the standard control media for professional AV systems. The 25G Hybrid architecture is a fully transparent platform for RS‑232 and RS‑422 control signals. Ports can be linked together or handled separately, allowing any third‑party control systems to be connected.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
4K Multimode Optical Output Board
25G-8OPTM2-OB-LC is a new 4K compatible fiber optical output board for the 25G router family.
Dual-Link DVI Output board
MX‑DVIDL‑OB is a Dual‑Link DVI Output Board supporting four Dual‑Link DVI‑D connectors.
Twisted pair wallplate and floorbox transmitter
UMX‑TP‑TX100 is a versitale transmitter which provides analog and digital audio and video connectivity from a remote point over Dual CAT cable.
DVI Multimode Fiber Optical Extender
Designed for rental and fixed use, DVI‑OPT-220‑Pro series extenders can transmit DVI‑D signals over multimode fiber cables up to a range of 2500 m.
4K Singlemode Optical Output Board
25G‑8OPTS2‑OB‑LC is a 4K compatible fiber optical output board for the 25G matrix family. These optical boards can extend up to a 10,000m distance using singlemode fiber technology. The OPTS technology provides a transparent medium for video, audio, Ethernet, USB KVM, RS‑232, IR and CEC data according to the 25G multilayer architecture and allows the extension
to MODEX receiver units.
Connector Size Multi-Mode Optical Extender
DVI-HDCP-OPTM-TX90 is a small Multi Mode DVI optical extender for HDMI 1.3 signals with HDCP, for ranges up to a 300 m. Video signals are transmitted over one Multimode 50/125 fiber cable. The reinforced housing and ports of these units assure operation safety and security.
16x16 Ultra Thin and Ultra Light DVI Matrix Switcher
The MX16x16DVI‑Slim with their 1.2 inch depth is today’s smallest and lightest 16x16 DVI matrix switchers which provide routing in the most rugged environments.
Fiber optical Output board for extending DVI-D signals
MX‑DVI‑OPT‑OB provides extremely long, 2500m distance extension over a single Multimode fiber for Single‑Link DVI signals on eight channels.
Single-Link DVI Cable Extender
DVISL‑Extender is a matchbox size inline equalizers designed to extend the usable range of high performance DVI signals up to a maximum of 50 m cable length. These extenders are state‑of‑the‑ art dynamic equalizers, which perform high speed cable compensation on long DVI cables. The amount of equalization is automatically adjusted regardless of the cable length connected. These units
provide up to 40 dB of insertion loss correction at 825 Mhz.
8x8 DVI Router with HDCP 1.2, HDMI 1.3 and DVI 1.0 Compatibility
MX8x8DVI‑HDCP‑Pro digital video router is the most advanced DVI router that supports DVI 1.0, HDCP 1.2 and even HDMI.
Twisted Pair Input board for DVI over CAT5...CAT7 cables
MX-DVI-TP-IB the 8 channel Twisted Pair Input board takes DVI signals over a single CATx cable. Each Input has a manual or adaptive CAT5, CAT6 or CAT7 Twisted Pair cable equalization for up to 40 dB signal loss.
CAT5, CAT6 and CAT7 twisted pair HDMI extenders
HDMI‑TP is deep color extender which can transmit HDMI or DVI‑D signals over two CATx cables, fully supporting HDMI 1.3a signals with or without HDCP encryption.
4K HDBaseT™ Input Board with PoE
Featuring eight HDBaseT™ input ports, this board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters.
CAT5, CAT6 and CAT7 twisted pair HDMI extender
HDMI‑TP is deep color extender which can transmit HDMI or DVI‑D signals over two CATx cables, fully supporting HDMI 1.3a signals with or without HDCP encryption.
Dual Link DVI reclocking extender over CAT5 ... CAT7 twisted pair cable
TP‑DL series transceivers transmit Dual‑Link DVI‑D signals over two CATx cables. TP‑DL series transceivers support the highest resolutions up to 3840x2400 including all HDTV resolutions: 720p, 1080p, 2K.
HDMI and HDCP Compliant Fiber Optical Input Board
MX‑HDMI‑OPT‑IB offers an extremely long, 2500m extension range over a single Multimode fiber for HDMI, DVI, VGA signals on eight channels supporting 4K resolution and 3D formats.
4K DVI-D Output Board with Digital Audio
25G‑8DVID2‑OB provides fully transparent HDMI 1.4 connectivity to the latest high‑end digital sources including 3D between the endpoints.
25G Hybrid Matrix Frame with 80x80 Crosspoint
The 25G frames can transmit video signals up to 4K resolution, support all 3D formats, handle forward audio, transmit USB‑KVM, Ethernet, bi‑directional RS‑232/RS‑422, IR and CEC signals. The intuitive graphical user interface offers easy and user‑friendly control accessing all available features. Advanced EDID Management is included in the frame which is also HDCP compliant.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
Pro Series DVI switcher
MX8x4DVI‑Pro is cost effective solution for routing DVI signals on 8 input / 4 output.
4K HDMI Input Board with Digital Audio Add-on
25G-8HDMI2-A2-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including 3D functions between the endpoints.
IR layer
Infrared is commonly used for remote control based applications. This Media Layer helps maintain the structure of the overall AV system. Third party control systems may send IR control commands to endpoints turning them on and off or switching their inputs.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
Optical Splitter with Two Identical Outputs
SP2OPT distributes one optical signal to two identical outputs. No power supply is required as the devices have no active electrical parts.
4K Multimode Optical Input Board
25G-8OPTM2-IB-NT is a new 4K compatible fiber optical input board for the 25G router family. These optical boards can extend up to 240m distance over multimode fiber.
Fiber optical Output board with Pixel Accurate Reclocking
MX‑DVI‑OPT‑OB‑R Output Board provides extremely long, 2500m extension and reclocking for DVI‑D signals over Multimode fiber on eight channels.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.